Instrument-based answers to the most-asked wireless question in a modern home.
A smart utility meter communicates by radio, transmitting in short bursts rather than continuously, and the honest way to understand yours is to measure it where you actually spend time. FieldWise measures smart meter RF with a Safe and Sound Pro 2 analyzer, reported as power density in microwatts per square meter, and compares readings against precautionary Building Biology SBM-2015 guidelines. Two facts frame almost every result. First, distance does most of the work: RF falls with distance roughly by the inverse-square law, so doubling your distance from the meter cuts exposure by about 75 percent. Second, position matters more than fear: a meter on the far garage wall and a meter behind a bedroom headboard are entirely different measurements, and only the reading tells you which situation you have.
The Pattern
Smart meters send data in brief pulses, with long quiet gaps, so an instantaneous reading can miss what a monitored reading catches. During an assessment the meter is observed long enough to capture its duty cycle, and readings are taken on the inside wall behind it, because the wall a meter shares with living space is what determines exposure indoors.
Measured levels in homes are almost always far below FCC public exposure limits. FieldWise works to precautionary Building Biology targets instead, which are stricter and sleeping-area focused, and reports where your home sits against those.
What Helps
The room-by-room measurement usually points to simple moves first: which side of which wall the meter sits on, where the bed or desk is relative to it, and what other RF sources share the same room, since a router or cordless base a meter of distance away routinely out-measures a smart meter across the house.
Where a meter does read elevated in a spot that matters, the report lays out options in priority order, from rearranging the room to discussing options with your utility. The measurement comes first, because it decides whether anything needs doing at all.
Context
A smart meter question is usually a wireless question in disguise. The same visit measures Wi-Fi, cordless phones, cell signal and neighbouring sources, so the meter reading lands in context instead of isolation. The signals you can’t see are rarely the ones you think to check.
Questions
Yes, but the Foundational Assessment at $850 is nearly always more useful, because it measures every RF source and ranks the meter against everything else transmitting in the home.
FieldWise does not deal in safe or dangerous labels. Measured meter levels are almost always far below legal limits; the assessment shows where yours sits against stricter precautionary guidelines and what would change the reading.
No. Transmissions come in short bursts with quiet gaps between them, which is why a patient measurement of the duty cycle beats a single instantaneous reading.
Distance does most of the work. A bank of meters directly behind a shared bedroom wall is worth measuring; the same bank across a parking lot usually is not. The reading settles it either way.
Every assessment is performed personally by founder Cameron Castaneda and ends with a written room-by-room report with prioritized next steps. Appointments run Monday through Sunday, 8am to 6pm. Call (970) 436-7611 or book a discovery call.